|
| SERIES 800 Mixer |
SERIES 600 Mixer |
 |
 |
| The high-performance Series 800 mixer is designed for the most demanding applications, such as strict sanitary, temperature and pressure/vacuum extremes, high chemical compatibility and other uses. You may specify the type of motor (electric, air, explosion proof) you want, various optional seals, even your choice of impeller types. |
The compact Series 600 mixer is the ideal choice for those less demanding applications and where space is at a premium. As with all Pope mixers, you may select from a wide range of motors, seals, impellers and other options to match your exact application needs. |
| Series 800 Mixer Specifications |
Series 600 Mixer Specifications |
Wetted Material
316-L stainless steel, Hastelloy C-276, other alloys - Teflon/other coatings available |
Vessel Connection
3" sanitary clamp standard - 150 lb flange mount, others available |
Bearings
High temperature, permanently lubricated. Double row lower, single row upper |
Shaft
3/4" diameter, standard or detachable "pool cue" styles |
Impeller
Marine type standard. Turbine, hydrofoil, Cowles, anchor, paddle, others available per application (mounted with set screws or welded, ground and polished) |
Motor Mount
Standard or quick removal type (for autoclaving, etc.) |
Motors
Electric:
• 1/3, 1/2, 3/4 hp DC variable speed
• 1/4, 1/3, 1/2, 3/4 hp DC gearmotor (choice of speed ranges)
• Others per application (including explosion proof, AC)
Air:
• 3/4, 1-1/2 hp variable speed (200-800 rpm)
• Others per application |
Cooling
Teflon lip seal to protect ball bearings. Two coolant side ports. |
Seal Specifications |
Version
Type 8 balanced, single, dry-running mechanical seal (double mechanical and other types available) |
Materials
316 stainless standard (Hastelloy available) Viton elastomers (Kalrez, others per application) Carbon primary ring, tungsten carbide mating ring |
Max Operating Speed
800 rpm - optional tachometer available (recommended operating speed) |
Max Seal Pressure
Full vacuum to 120 psig (dry running), 150 psig (wet running) |
Seal Lubrication
Dry (can be wetted - see 'Cooling' above) |
Operating Temp
-40¾ F to 300¾ F |
Seal Life
3000 hours minimum (estimated) |
|
Wetted Material
316-L stainless steel |
Vessel Connection
2" sanitary clamp standard, others available |
Shaft
1/2 diameter (detachable 'pool cue' type available) |
Impeller
Marine type standard. Turbine, hydrofoil, Cowles, others available per application (mounted with set screws or
welded, ground and polished) |
Motor Mount
Standard or quick removal type (for autoclaving, etc.) |
Motors
Electric:
• 1/4, 1/3, 1/2 DC variable speed
• 1/8, 1/4, 1/3 hp DC gearmotor (choice of speed ranges)
• Others per application (including explosion proof, AC)
:Air:
• 3/4 hp variable speed (200-800 rpm)
• 1/4 hp variable speed gearmotor (30-300 rpm)
• Others per application |
Seal Specifications |
Version
Type 6 single, dry-running mechanical seal |
Materials
18-8 stainless hardware, Viton elastomers (Buna, EPDM available) Carbon primary ring, ceramic mating ring |
Max Operating Speed
800 rpm - optional tachometer available
(recommended operating speed) |
Max Seal Pressure
75 psi (not rated for vacuum use) |
Operating Temp
-20¾ F to 240¾ F |
Seal Life
5,000 hours (estimated) |
|
|
